Nordex Explosives Ltd.

ELECTRIC

> Electric Detonators

The electric detonators are designed to provide precise control necessary to produce accurate and consistent blasting results in a variety of blasting applications in the mining, quarrying and construction industries.

Technical Bulletin | MSDS Sheet

NON-ELECTRIC

> Dual Delay Detonators

Dual Delay Detonators combine In-Hole Delays and Quick Relay Connectors in one product. This combination offers convenience for storage and inventorying of one product instead of two and often reduces space requirements for transportation. Connecting of blast patterns is generally faster with Dual-Delays as fewer connections are required in total. Additionally, fewer individual products used in the blast pattern help reduce clutter at connection points and makes visual inspections easier. For millisecond delay blasting, Dual-Delays are available in the following down-hole detonators; 500 or 2000 ms. Surface delay times are offered in 25 or 200 ms.

Technical Bulletin | MSDS Sheet

> MS Detonators

MS Series In-Hole Delays are available in a sequence of 31 whole number periods from instantaneous (0 ms) to 1000 ms. They are designed to be used as down-hole detonators for the initiation of cast boosters, high explosives or pneumatically loaded ANFO. In-Hole delays come equipped with T-Connector for compatibility with detonating cord inititation or can be initiated by another electric or non-electric detonator.

Technical Bulletin | MSDS Sheet

> LP Detonators

LP In-Hole Delays are available in a sequence of 26 whole number periods from instantaneous (0 ms) to 9600 ms. The LP delay sequence is appropriate for applications such as tunneling and shaft or raise mining where long delays are required between holes to allow for movement of broken rock. They are designed to be used as down-hole detonators for the initiation of cast boosters, high explosives or pneumatically loaded ANFO. In-Hole delays come equipped with a T-Connector for compatibility with detonating cord-initiation.

Technical Bulletin | MSDS Sheet

> Surface Connectors

Surface Connectors are especially designed for the initiation of other shock tube detonators as a delay between holes or decks within a hole. Quick-Relay Connectors are equipped with connector blocks able to contain 8 outgoing shock tubes yet have a lowered base charge to reduce noise levels and eliminate shrapnel cut-off concerns. These detonators are available in 9 delays from instantaneous (0 ms) to 200 ms. (Quick-Relay Connectors should never be used to attempt initiation of detonating cord).

Technical Bulletin | MSDS Sheet

ELECTRONIC

> Daveytronic III Electronic Detonator

As a result of greater dynamic shock resistance and 0 to 14,000 ms timing delays, the new Davyetronic III electronic detonator meets the safety and flexibility requirements of various applications including open pit mining. It now includes an exclusive smart shunt that permanently protects the fusehead up to the firing time, reaching an even higher level in safety. Daveytronic III electronic detonator has the highest rated variance in the industry of +/- 0.02%.

Technical Bulletin | MSDS Sheet

> Daveytronic� Blasting Software

Daveytronic� Blasting Software benefits from continuous innovation from Davey Bickford's own research department. Design and simulate your firing plans on a computer with Daveytronic 2D software, and download it into the hand held programming unit, reducing on-bench programming time.

Technical Bulletin

> Davey Bickford Wireless Blasting System

Davey Bickford Wireless Blasting System allows the remote firing of single or multiple shots. Besides Davey Bickford's standard 2.4GHz / 900 MHz modems (which has a wireless range of 5km), the system can be customized to various types of digital underground radio systems such as "leaky feeder" system, WLAN, WIFI Cyclic Redundancy Check (CRC), guaranteeing a high level of data integrity.

Technical Bulletin